本文已被:浏览 1615次 下载 3138次
投稿时间:2021-06-01 修订日期:2021-06-21
投稿时间:2021-06-01 修订日期:2021-06-21
中文摘要: 利用Gleeble-3180热模拟试验机,对Cu-0.58Sn合金在400~700 ℃,应变速率0.01~10 s?1条件下的热变形行为进行了研究。结果表明:该合金具有正的应变速率敏感性和热敏性,其流动应力随应变速率的增大而增大,随变形温度的升高而减小。建立了本构方程及热加工图,计算得出CuSn合金的热变形激活能为239.928 kJ/mol,同时优化出合金的最佳热加工参数为:变形温度500~700 ℃,应变速率3.16~10 s-1。
Abstract:The thermal deformation behavior of Cu-0.58Sn alloy at 400~700 ℃and strain rate of 0.01 ~10 s?1was studied by Gleeble-3180 thermal simulation test machine.The results show that the alloy has positive strain rate sensitivity and thermal sensitivity.The flow stress increases with the increase of strain rate and decreases with the increase of deformation temperature.The constitutive equation and hot workingdiagram were established,and the hot deformation activation energy of CuSn alloywas calculated to be 239.928 kJ/mol.At the same time,the optimum hot workingparameters of the alloy were optimized as follows:deformation temperature 500~700 ℃,strain rate 3.16~10 s-1.
文章编号: 中图分类号: 文献标志码:
基金项目:江苏高校优势学科建设工程资助项目
作者 | 单位 | |
花思明* | 南京航空航天大学材料科学与技术学院,中铁建电气化局集团康远新材料有限公司 | huasiming1987@126.com |
张平则 | 南京航空航天大学材料科学与技术学院 | |
刘子利 | 南京航空航天大学材料科学与技术学院 | |
王国迎 | 中铁建电气化局集团康远新材料有限公司 | guoyingw2012@163.com |
引用文本:
花思明,张平则,刘子利,王国迎.Cu-0.58Sn合金热变形行为和热加工图研究[J].有色金属工程,2021,(10):.
花思明,张平则,刘子利,王国迎.Cu-0.58Sn合金热变形行为和热加工图研究[J].有色金属工程,2021,(10):.