###
DOI:
有色金属工程:2024,14(3)
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
不同阳极氧化电压对2A12铝合金表面性能的影响
魏士钧, 汪宏宇, 宋海鹏, 杜娟, 刘礼平
(中国民航大学中欧航空工程师学院)
Effect of different anodizing voltages on surface properties of 2A12 aluminum alloy
WEI SHIJUN, wanghongyu, songhaipeng, dujuan, liuliping
(China-Europe School of Aeronautical Engineers, Civil Aviation University of China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 822次   下载 551
投稿时间:2023-09-21    修订日期:2023-11-20
中文摘要: 以2A12铝合金为基体进行硫酸-硫酸铝阳极氧化,研究了不同阳极氧化电压对阳极氧化膜微观形貌、成分、孔隙率、显微硬度和耐蚀性的影响。结果表明:不同阳极氧化电压下生成的氧化膜都呈多孔状形貌;20V时样品表面孔隙率最大(4.394%)、含氧量最高(35.76%);30V时表面粗糙度最大(34.9);随阳极氧化电压增加,样品表面的耐蚀性呈现先增大后减小的趋势,20V时耐蚀性最强。将经过最佳阳极氧化的铝合金基体涂敷环氧涂层后,对其力学性能和耐蚀性进行分析,结果表明阳极氧化工艺可大大提高涂层样品的结合力和耐蚀性。
中文关键词: 阳极氧化  铝合金  孔隙率  电化学阻抗
Abstract:The effects of different anodic oxidation voltages on micromorphology, composition, porosity, microhardness and corrosion resistance of anodic oxide film were studied by using 2A12 aluminum alloy as the matrix. The results show that the oxide films generated under different anodic oxidation voltages are porous. At 20V, the surface porosity of the sample was the largest (4.394%) and the oxygen content was the highest (35.76%). The surface roughness is the largest (34.9) at 30V, and with the increase of anodic oxidation voltage, the corrosion resistance of the sample surface shows a trend of increasing first and then decreasing, and the corrosion resistance is strongest at 20V. After the optimal anodized aluminum alloy matrix is coated with epoxy coating, the mechanical properties and corrosion resistance of the aluminum alloy matrix are analyzed, and the results show that the anodizing process can greatly improve the adhesion and corrosion resistance of the coating sample.
文章编号:YSJSGC20230566     中图分类号:    文献标志码:
基金项目:中央高校基本科研业务费(3122023047)
引用文本:
魏士钧,汪宏宇,宋海鹏,杜娟,刘礼平.不同阳极氧化电压对2A12铝合金表面性能的影响[J].有色金属工程,2024,14(3):.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299224

杂志信息

期刊简介

相关下载

联系我们

电话:86-10-63299224/63299153

传真:010-63299754

Email:ysjsgc@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地十八区23号楼

关注微信公众号