Volume 5,Issue 3,2015 Table of Contents

   
Other Issues:  
  

Geology, Mining and Safety Engineering

Analysis metallogenic geological conditions of Deqin Tuoding copper polymetallic in Yunnan
  kongyue,Li chuanban and Wang Jianshe
  2015,5(3) [Abstract]  [View PDF]
  

Mineral Processing and Process Mineralogy

Experimental Research on the Beneficiation Process for a Tungsten Ore from JiangXi
  Wang Yutong,He Guichun,Yu Xinyang and Luo Xianping
  2015,5(3) [Abstract]  [View PDF]
  

Geology, Mining and Safety Engineering

Technical Study on the Geological Hazard Control for Ancient Goaf Subsidence in One Mine
  ji xuewen and panyi
  2015,5(3) [Abstract]  [View PDF]
  

Mineral Processing and Process Mineralogy

Experimental Research On Beneficiability of#$NBSQuartz Vein Type Gold Ore
  MAO Yi-Lin,CHEN Xiao-Qin,YANG Jin-Zhong and LIU Neng-Yun
  2015,5(3) [Abstract]  [View PDF]
  
Research on a Low-grade Lattice-gold Rock Gold Deposit Experiment
  XIAO Jun,CHEN Dai Xiong and YANG Jian Wen
  2015,5(3) [Abstract]  [View PDF]
  

Materials Preparing and Processing

Effects of aluminum silicon alloy microstructure and mechanical performance of High iron content Cu and Mn elements
  LI LinXin and WIN ShenLiu
  2015,5(3) [Abstract]  [View PDF]
  

Extractive Metalllurgy and Chemical Engineering

The preparation of porous nozzles for refining molten aluminum by mullite sands
  zhanhaihong
  2015,5(3) [Abstract]  [View PDF]
  

Geology, Mining and Safety Engineering

The analysis about geological characteristics of Pb-21 ore-body of the Mengya’ a mining area in Tibet and ore mark
  dengjinxian and zhongkanghui
  2015,5(3) [Abstract]  [View PDF]
  
A New Approach to Neutralize Local Failure of Rock Slope in Deep Open-pit Mining
  you chun'an and du wen
  2015,5(3) [Abstract]  [View PDF]
  

Materials Preparing and Processing

Forming Mechanism of α-Phase in Solidified Microstructure of Hypereutectic Mg-Cu Alloy
  Tang Ling
  2015,5(3) [Abstract]  [View PDF]
  
Failure analysis of steel-cored aluminum strand
  LIbo and FANlei
  2015,5(3) [Abstract]  [View PDF]
  

Extractive Metalllurgy and Chemical Engineering

Leaching Rapid Separation of High Alumina Fly Ash Sintering Process
  GONG Yan-bing,SUN Jun-min,ZHANG Zhan-jun,YANG Hui-bin and ZHU Ying-bao
  2015,5(3) [Abstract]  [View PDF]
  

Contents

Optimization of Flotation Process of a Copper Mine in Hubei
  zhaoyi,penghuiqing,liaoxiang,zhouxinjun and qinlei
  2015,5(3) [Abstract]  [View PDF]
  

Materials Preparing and Processing

Effect mechanism of compositions on the synthesis of Ti3SiC2 powders
  donghongfeng
  2015,5(3) [Abstract]  [View PDF]
  

Geology, Mining and Safety Engineering

The new progress of site mixing technology of BGRIMM explosive
  Li Xin,Zha Zhengqing,Gong Bing and Ren Bin
  2015,5(3) [Abstract]  [View PDF]
  

Contents

The stimulus response of CMC and its influence on talc hydrophobic
  fengbo and wang huihui
  2015,5(3) [Abstract]  [View PDF]
  

Environmental Science and Engineering

Design of Arsenic Wastewater treatment for One Gold Smelting
  HUANG Hai-hui,WANG Yun,CHANG Yao-chao,SUN Liu-gen,GUO Chi-hao and LI Yun
  2015,5(3) [Abstract]  [View PDF]
  

Materials Preparing and Processing

The corrosion behavior of BFe10-1-1 cupronickel alloy tubes in molten SnAg3Cu0.5
  zhangtianhe
  2015,5(3) [Abstract]  [View PDF]
  

Extractive Metalllurgy and Chemical Engineering

BoilingSchlorinationfurnaceSofSaluminum chlorideSsaltSremovalprocessScondition
  SHI yu-ying
  2015,5(3) [Abstract]  [View PDF]
  

Materials Preparing and Processing

Effect of Deformation and Aging Treatment on Microstructures and Mechanical Properties of 2024 Aluminum Alloy
  zhaoxiaoyu
  2015,5(3) [Abstract]  [View PDF]
  

Extractive Metalllurgy and Chemical Engineering

The analysis of particle sampling of copper flash smelting furnace
  XIE Kai and misha
  2015,5(3) [Abstract]  [View PDF]
  

Environmental Science and Engineering

Recovery Process of Medium-temperature Waste HeatIn Acid-making with Copper Smelting Gas
  Sun Zhizhong
  2015,5(3) [Abstract]  [View PDF]
  

Materials Preparing and Processing

Study on Preparation and cell compatibility of titanium and hydroxyapatite composite coatings
  sunyaoning,yinyakang and xuguoqiang
  2015,5(3) [Abstract]  [View PDF]
  

Metallurgical and Material History

Research on the composition and metallurgical structure of bronze in the west cemetery in JingGouZi, Linxi, Inner Mongolia
  LI YANXIANG,Li Lihui and LI Jianxi
  2015,5(3) [Abstract]  [View PDF]